General
ALWAYS keep the cabinet surfaces dry!
Avoid excessive moisture and rapid temperature change near the cabinet, as they can potentially alter the cabinet finish and overall stability.
Essential Materials
- Lint free cotton cloth
- Mild detergent or soap
- Warm water
Dampen the cloth with the mild detergent or soap and warm water. Blotting motion is recommended, but do wipe gently if necessary.
After Installation & Regular Dusting
Use a lint-free cloth to wipe down all exterior and interior surfaces to remove dust.
Basics
- Dry surfaces ASAP with lint free soft cotton cloth
- Leaving residues on cabinet surface can discolor and harm finishes
- Avoid using dishcloth and sponge
- Avoid ammonia-based cleaners
- Avoid soaps with dyes as they might taint the cabinet finish
Wipe Spills
Food spills and grease will come off easily if promptly removed in a timely manner.
Wipe up spills immediately with a lint free soft cotton cloth to avoid the cabinet absorbing the moisture.
Check on areas around sink and dishwasher to make sure water and detergent residues are not staying on the cabinet surface.
Do not leave printed materials (i.e. magazines, receipts) on cabinet surface, as the printing ink can bleed into the cabinet finish.
Moisture & Heat
Keep any sort of moisture and heat away from the cabinet surface!
- Avoid draping damp or wet cloths over base cabinet doors
- Do not attach towel racks to the interior of the cabinet doors
- Use trays under pots or other items that leak water easily
- Avoid placing small kitchen appliances where the heat source or steam source is directed at the cabinet surfaces
- Use hot pads under hot items when setting them on top of wood surfaces
Abrasives
NEVER clean cabinet surface with abrasive materials (i.e. scouring pads, steel wool, wire brushes, powdered cleaners).
- Avoid sliding objects across the cabinet surface
- Do not let the oven cleaner touch any part of the cabinet
- Be cautious when handling sharp objects (knives, scissors etc) in that they can damage the cabinet surface
- When you are unsure of a cleaner's suitability, don't use it
Harsh cleaners and detergents may penetrate the surface, hence allowing food or moisture to enter and deteriorate the cabinet finish.
NEVER leave a cloth dampened with cleaners on a cabinet surface for any length of time.
Glass Door Inserts
Materials:
- Household glass cleaner
- A soft and clean cloth
Apply glass cleaner directly onto the cloth instead of the glass or mirror.
Avoid excess glass cleaners dripping into cabinet joints and corners.
Ammonia should never be used at full strength.
